Page 4
Warranty Psion Teklogix provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the statement of Warranty and Product Support provided at: www.psionteklogix.com/warranty. The warranty on Psion Teklogix manufactured equipment does...
Page 5
If your end-of-life Psion Teklogix product or accessory carries a label as shown here, please contact your local country repre- sentative for details on how to arrange recycling. For a list of international subsidiaries, please go to: http://www.psionteklogix.com/EnvironmentalCompliance list of approvals north america EMC: FCC part 15, subpart B;...
Page 6
RoHS-compliant as per the EU directive. Other than as noted below, a Psion Teklogix product that does not have an accompanying RoHS logo signifies that it was placed on the EU market prior to July 1, 2006, and is thereby exempt from the directive.
Page 7
Psion Teklogix Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for...
Table of Contents 1.0 Important Vehicle Cradle Instructions 2.0 Vehicle Cradle Mounting Recommendations 2.1 Cable Arrangement 2.2 Port Replicator Cable 3.0 The Vehicle Cradle 3.1 Wiring Vehicle Power to the Vehicle Cradle 4.0 Using the Vehicle Cradle 4.1 Cleaning and Maintaining the Vehicle Cradle 5.0 Support Services and Worldwide Offices 5.1 Technical Support 5.2 Product Repairs...
Important: This WORKABOUT PRO Vehicle cradle cannot be used with other non- WORKABOUT PRO cradle accessories. Although they may share the same battery terminating connector, they are designed with different applications in mind. Psion Teklogix WAPro Vehicle Cradle User Manual...
If you are unable to obtain suitable advice, contact Psion Teklogix for assistance (see Chapter 5: Support Services & Worldwide Offices). Psion Teklogix WAPro Vehicle Cradle User Manual...
Page 11
Ensure the mounting has capacity to hold the cradle and terminal. Cradle plus terminal weight is approx. 2 lbs. Psion Teklogix has recommended and approved mounts. Consult Psion Teklogix Customer Service for direction. Psion Teklogix WAPro Vehicle Cradle User Manual...
Page 12
Remove that page only - to use this template. please be aware: Before Psion Teklogix releases a product, our engineering team exposes that product through a series of severe testing to ensure it will survive in the rugged environments in which our products are typically used.
Page 13
Psion Teklogix WAPro Vehicle Cradle User Manual...
Page 14
Psion Teklogix WAPro Vehicle Cradle User Manual...
2.2 port replicator Cable Important: The WA1210-G2 and WA1310-G2 Vehicle Cradles have a Data Cable that terminates in a 15-pin connector. Please do not connect a VGA Monitor or a Computer to these Data Cables.
A power cable (AMP - circular plastic connector - 2-pin) extends from your power Vehicle Cradle. Using a power extension cable (Psion Teklogix Model # CA1210 - order separately), this cradle can be wired to a filtered, fused (maximum 5A) accessory supply on the vehicle. This ex- tension cable is sheathed to provide added ruggedness.
Page 17
If an unfused power source must be used a fuse assembly (PN 19440-300) must be added to the extension power cable (the fuse and instructions are supplied with the cable). Use only a 5A slow blow UL approved fuse in the fuse assembly. Psion Teklogix WAPro Vehicle Cradle User Manual...
Removal remains the same process as in the manual. Push the release button to the rear, the computer moves upward. Then lift. (Figure 4.1) Psion Teklogix WAPro Vehicle Cradle User Manual...
Page 19
2 Press the computer down through the resistance until it bottoms on the cradle. The locks will engage. This can be one smooth motion if you wish. Figure 4.1 Psion Teklogix WAPro Vehicle Cradle User Manual...
20,000 cycles, it will wear over time and will no longer lock the WORKABOUT PRO securely in the Vehicle Cradle. For replacement parts and instructions contact Psion Teklogix (See 5.0: Support Services And Worldwide Offices). Partial disassembly is required.
5. Support Services & Worldwide Offices Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. 5.1 technical support For technical support in North America: Call Toll free: +1 800 387 8898 Option 3, or Direct Dial: +1 905 813 9900 Ext.
For repair service in Asia, please contact the local office listed in the website below: http://www.psionteklogix.com 5.3 Worldwide Offices COMPANY HEADQUARTERS Psion Teklogix Inc. 2100 Meadowvale Boulevard Mississauga Ontario Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 812 6300 Email: salescdn@psion.com Psion Teklogix WAPro Vehicle Cradle User Manual...
Page 23
NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTRE Psion Teklogix Corp. 1810 Airport Exchange Boulevard Suite 500 Erlanger, Kentucky USA 41018 Tel: +1 859 371 6006 Fax: +1 859 371 6422 Email: salesusa@psion.com Continued next page: Psion Teklogix WAPro Vehicle Cradle User Manual...
Page 24
13591 Aix-En-Provence Cedex 3, France Tel: +33 4 42 90 88 09 Fax: +33 4 42 90 88 88 mAIL TEkEURO pSION For a complete listing of international offices, please refer to: www.psionteklogix.com Psion Teklogix WAPro Vehicle Cradle User Manual...