Front Cabinet
5. BACKLIGHT REMOVAL
(1) Remove two screws (a).
(2) Remove the Backlight from the LCD Module.
Top (Upper) Backlight Ass'y
(a)
(a)
Bottom (Lower) Backlight Ass'y
(d)
CN3
(b)
J3
(a)
J2
CN2
J5
(b)
(a)
(d)
(c)
(c)
LCD Module
(d)
(a)
4. INVERTER, POWER, CONTROL,
AND MAIN PCB ASSEMBLY REMOVAL
(1) Disconnect J8, J2 and J7.
(a)
(2) Remove four screws (a).
(3) Remove the Main PCB Ass'y.
(d)
(4) Disconnect CN2 and CN3.
(5) Remove two screws (b).
(6) Remove the Inverter PCB Ass'y.
(7) Remove two screws (c).
(8) Remove the Control and Power PCB Ass'y.
(9) Remove four screws (b).
(10) Remove the Front Cabinet.
6. LCD MODULE REMOVAL
(1) Remove four screws (a).
(2) Separate the LCD Module from the Main Frame.
(a)
(a)
(a)
(a)
- 9 -