LG SxS GR-P247 Service Manual page 20

HOW TO INSTALL REFRIGERATOR
1. Connection of Pipe Connector A and B.
1) Turn off main valve of water pipe.
2) Disconnect water tap from piping by loosening nuts.
3) Connect pipe connector A and B to piping after sealing
the pipe connector with sealing tapes.
4) Connect feed valve to pipe connector A.
5) If there is only one tap water pipe, connect pipe
connector A only and install feed pipe.
Pipe Connector B
Hot Water
Pipe Connector A
Cold Water
2. Water Supply
1) After the installation of feed water, plug the refrigerator
to the earthered wall outlet, press the water dispenser
button for 2 - 3 minutes, and confirm that the water
comes out.
Single Lever Type Faucet
(general)
Feed
Valve
Two Hands Type Faucet
How to wind
Sealing Tapes.
Water Tube
- 20 -
Caution : • Feed pipe should be connected to cold water
line. If it is connected to hot water line, trouble
may occur.
• Please check rubber packing when connecting
feed pipe.
General Type
Feed
Valve
Single Lever Type Faucet (one
hole, tech type and hand spray)
Feed
Feed
Valve
Valve
2) Check leakage at connecting part, then arrange water
tube and locate the refrigerator at its regular place if
there is no leaking.
Feed
Valve
Water Tube
Nut