Memory Module; Disconnect All External Devices Connected To The Computer; Disconnect The Power From The Computer By First Disconnecting The Power Cord From The Ac Outlet And Then Disconnecting The Ac Adapter From The Computer; Remove The Battery (See Battery - HP G72 Maintenance And Service Manual

Memory module

Description
1 GB, 1066 MHz DDR3
2 GB, 1066 MHz DDR3
4 GB, 1066 MHz DDR3 (for model 1.1 only)
Before removing the memory module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2.

Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Turn the computer upside down with the front toward you.
2. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the wireless/memory module
compartment cover to the computer.
3. Lift the back side of the memory module cover (2)
4. Lift the cover off the computer (3). The wireless/memory module compartment cover is included
in the plastics kit, spare part number 616497-001.
NOTE:
5. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
50 Chapter 4 Removal and replacement procedures
Battery on page
Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.
Spare part number
598859-001
598856-001
599092-001
41).