Hitachi CP-X608 Brochure & Specs page 2

Manual Lens Shift
The lens can be moved manually to shift the position of the image.
It can be moved 9cm to the left and right, and 50cm up and down on
a 70" screen. Fine adjustments after ceiling installation can be done using
a screwdriver. Adjusting the screen position can also be done easily.
Lamp Door on Top
The door used to replace the lamp
is on the top of the projector,
making it easy to change the lamp
when the projector is installed on
the ceiling.
High Performance Air Filter
The air filter uses Electret Air Filter charged fibers to efficiently filter out
dust so performance does not suffer even in dusty environments.
Dust Electret Air Filter
charged fibers
Dust Dust
Urethane High Performance
Filter Air Filter
Scheduling Functions
The timing of automatically switching each projector's power on and
off can be set from a PC. In education and training situations, power
on and off can be set to coincide with lesson periods, saving energy
and lamp time.
Internal Clock Correction
When the projector is connected to a network it automatically accesses
a server, which in turn automatically corrects the projector's internal clock.
Projector Monitoring and Control
The CP-X608 and CP-X605 can be integrated into a LAN for centralized
monitoring of power, input, lamp time and other functions. In fact, more
than 500 projectors can be monitored from a single PC. It is also possible
to control the power and other functions of a single specified projector
or of all projectors linked via the LAN. This makes operating projectors
installed in different rooms a simple task. Moreover, Projector Monitoring
and Control can be applied to both wired and wireless networks.
LAN
Wireless
E-mail Alerts
Using Simple Network Management Protocol (SNMP), the projector is
able to remotely monitor and diagnose its status and the status of other
network applications with SNMP Management Software. When an error or
trouble occurs, the projector uses Simple Mail Transfer Protocol (SMTP)
to send a warning massage to up to five e-mail addresses.
Dust
E-mail
Control and Monitoring via Web browser
Projectors can be controlled and monitored via a web browser without
having to download and install application software.
Still Image Transfer (e-SHOT)*
Using this function, VGA-quality still pictures can be transferred from
a PC to the projector. And by using the Schedule function, the images
can be shown at preset times for using the screen like a message board.
* To use these functions, it is necessary to download the appropriate software. Ask your dealer for details.
Because of .........
[CP-X605]