Factory Reset; Station Not Available; Battery Removal - M Bass MOSDR011 User Manual

Factory Reset

Carrying out a factory reset clears any
settings that you have implemented in the
memory and reboots the radio.
To perform a factory reset press and hold
the menu button for 2 seconds.
A confirmation screen appears asking you
to press SELECT if you wish to continue and
reset your radio. The function will time out
if the SELECT button is not pressed in three
seconds.
Following a factory reset the radio will power
up with only the factory default settings
available and will behave as if it had been
powered up for the first time.
Factory Default Settings
The radio will revert to the following
defaults:
No Stations in station list
•
• No Presets allocated
• The Station order is alphanumeric
EQ setting is Mbass
•
Display mode is scrolling DLS
•
32

Station not available

If no stations are found, then a message
advising that a station is not available is
displayed.
Use the Central Navigator button (LEFT /
RIGHT) to scroll to another station you want
to tune to and press SELECT.
If SELECT is pressed and the chosen station
is not available, the screen displays the
signal strength meter.
To exit this screen use the Central Navigator
button (LEFT / RIGHT) to scroll to another
station you would like to tune to and press
SELECT.

Battery Removal

Always turn the radio off before removing
the batteries.
When batteries are replaced in the radio,
you must press the power button to switch
the radio back on.
The radio retains all its settings. Battery
replacement does not cause a factory reset.