Care And Cleaning; What To Do If - AEG KR8403001 User Manual

26 www.aeg.com

12. CARE AND CLEANING

WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.
12.1 Shelf support
Removing the shelf support
You can remove the shelf support to
clean the side walls.
1. Carefully pull the supports up and
out of the front catch.

13. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
Problem
The appliance does
not heat up.
1
3
2
Possible cause
The appliance is deactiva-
ted.
2. Lightly move the supports on the
front catch inwards.
3. Pull the supports out of the rear
catch.
Installing the shelf support
To install the shelf support follow the
procedure in the opposite order.
12.2 Lamp
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass
cover can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Replacing the lamp at the cavity
ceiling:
1. Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
Activate the appliance.
Remedy