NordicTrack NTL14011.0 User Manual page 10

7. Insert the wires into the Left Upright (89) as you
set the console assembly on the Left Upright
and the Right Upright (90). Be careful not to
pinch the Upright Wire (84).
Attach the console assembly with four 5/16" x
1 1/2" Screws (5) and four 5/16" Star Washers
(10). Start all four Screws, and then tighten
them.
8. Identify the Left Handrail (87), which is marked
"Left." Slide the Left Handrail between the con-
sole assembly and the pulse assembly.
Attach the Left Handrail (87) with two 5/16" x 2"
Screws (4), a 5/16" x 3 3/4" Screw (2), and three
5/16" Star Washers (10) as shown. Start all
three Screws, and then tighten them.
Attach the Right Handrail (not shown) to the
console assembly as described above.
7
5
10
84
89
8
Console
Assembly
10
10
Console
Assembly
Pulse
Assembly
4
10
4
2
5
10
90
87