Honda 2010 Ridgeline Owner's Manual page 92

System Setup
NOTE:
The maximum size of the "Avoid area"
is 1/4 of the navigation display screen
regardless of the map scale setting.
The selected area will be displayed as a
shaded box with a yellow border. Push
in on the joystick to set the end point of
the avoided area. To "redraw" the area,
touch Cancel and repeat the area
selection process. If your selected area
contains a freeway, the system will
prompt you with a pop-up box saying
"Do you want to avoid freeways?"
92
Navigation System
Answering "No" allows you to enter a
route through an avoided area on a
freeway and skip the "Avoid area
caution box." See Pop-Ups and
Disclaimers on page 64.
Say or select Done to return to the Edit
area screen. When you return, the
"Vicinity" field is automatically filled in
by the system. Re-edit the area "Name"
if desired. Select Done on the Edit
avoid area screen to finish editing.
Your new avoided area will now appear
on the "Avoid area" list and be viewable
on the map screen.
2010 Ridgeline
NOTE:
• You can select areas to avoid,
however you cannot select roads or
areas that you want the system to use
for routing.
• If you are drawing a box around a
road as an area to avoid, then ensure
the following: When you draw the
box, make sure that the road or
portion of a road that you encircled
includes an intersection. For
instance, in the example below,
highway 213 will be avoided, but Van
Ness will not be avoided because it
lacks an intersection in the enclosed
box.