Rearview Camera; Rearview Camera Brightness Adjustment - Honda 2010 Ridgeline Owner's Manual

System Setup

Rearview Camera

Your vehicle is equipped with a
rearview camera as shown in the
illustration.
Whenever you shift to R (Reverse) with
the ignition switch in the ON (II)
position, the rear view is shown on the
navigation screen. For the best image,
always keep the rearview camera lens
clean, and be sure it is not covered.
Since the rearview camera display area
is limited, you should always back up
slowly and carefully, and look behind
you for obstacles.
100 Navigation System
NOTE:
• The rearview camera has a special
lens that makes distances appear
closer than they actually are.
• The rearview camera display has a
limited range, and the size and
position of objects around the area
may appear different from reality.
Make sure to check the surrounding
area carefully.
Rearview
Camera
2010 Ridgeline
Rearview Camera Brightness
Adjustment
When the vehicle is in reverse, the touch
screen and navigation "hard" buttons
are locked out, except the ZOOM
buttons. Touching the "▼" or "▲"
button allows you to adjust the
brightness of the rearview camera
image. This brightness adjustment is
independent of the screen brightness
adjustment in Setup.
NOTE:
• The camera brightness cannot be
adjusted by voice control.
• Slight delays can occur when
switching to the camera image, or
switching back to the map/menu
screen. This is normal.