Table of Contents
Advertisement
Flow Chart
Channel Setting Mode
Self programming mode
[Side2]
[Side2]
Channel set mode
[2]
[Side2]
RX frequency
[Side1]
[2]/[3]
[Side2]
RX signaling
[Side1]
[2]/[3]
[Side2]
TX freguency
[Side1]
[2]/[3]
[Side2]
TX signaling
[Side1]
[2]/[3]
[Side2]
option signaling
[2]/[3]
[Side2]
ID
[Side1]
[2]/[3]
[Side2]
Busy channel lockout
[2]/[3]
[Side2]
Best Shift yes/no
[2]/[3]
[Side2]
RF Power High/Low
[2]/[3]
[Side2]
Wide/Narrow
[2]/[3]
[Side2]
Scan delete/add
[2]/[3]
[Side2]
Priority channel
Not used when (Scan) Priority is not Fixed.
[2]/[3]
[Side2]
Not used when Home Channel is not set in key Assignment.
Home channel
[2]/[3]
[Side2]
Compander yes/no
[2]/[3]
[Side2]
PTT ID
[2]/[3]
[Side2]
Begin of TX ID
[Side1]
[2]/[3]
[Side2]
End of TX ID
[Side1]
[2]/[3]
REALIGNMENT
Channel selection
[2]
Channel Delete
OFF
[Side1]
OFF
QT
DQT N
[ ]
[Side1]
[Side1]
OFF
[Side1]
OFF
QT
DQT N
[ ]
[Side1]
[Side1]
Data clear
Not valid if Dial ID=Disable
Data clear
and PTT ID=off, or EOT is set.
Not valid if Dial ID=Disable
Data clear
and PTT ID=off, or BOT is set.
8-3. Function Setting Mode
This is a mode for using the panel keys to make function
settings without using the FPU, that operate on all channels.
Pressing the [Side1] when "SELF" is displayed, sets the
Function Setting Mode.
Select an item set using [3] then change the selection with
the encoder.
The data displayed using [2] is stored in the memory and
then proceeds to the next item. Pressing [3] proceeds to
the next item without storing it in the memory.
DQT I
Press [Side1] to display "SELF" and return to reset (default)
status.
Function Setting Mode
No. Function Choices
DQT I
1 [Side1]
No Function LAMP_OFF
Talk Around LAMP_3
Display Character LAMP_5
Home Channel LAMP_7
Channel Down LAMP_8
Channel Up LAMP_9
Keylock
Lamp
2-Tone Encode LAMP_16
Select
Monitor A
Monitor B
Monitor C
Monitor D
RF Power Low LAMP_21
Scan
Scan DEL/ADD LAMP_23
Operator
Selectable Tone
2 [Side2]
No Function MON_OFF
Talk Around MON_3
Display Character MON_5
Home Channel
Channel Down MON_8
Channel Up MON_9
Keylock
Lamp
2-Tone Encode MON_16
Select
Monitor A
Monitor B
Monitor C
Monitor D
TK-272G
Display
Remarks
Function Key
Default
LAMP_10
LAMP_11
Default
LAMP_17
LAMP_18
LAMP_19
LAMP_20
LAMP_22
LAMP_27
MON_7
MON_10
MON_11
MON_17
Default
MON_18
MON_19
MON_20
11
Hide quick links:
Advertisement
Table of Contents
