Advertisement
GB
5-11-2003
9:00
Pagina 3
Remove the feet and the wheels from the polystyrene packing. Turn the radiator upside-down
on a rug or a soft surface in order to prevent damaging the paint finish.
-
Fit the wheels to the spindles on the feet and push firmly until they click into position. Pull
each wheel to check that it is correctly inserted.
-
The feet with the casters must be fitted with two arc-shaped brackets only between the
1st and 2nd element (see fig. 1 to 4 inclusive)
BE CAREFUL
Operate the heater in upright position only (wheels on the bottom, controls on the top). Any
other position could create hazard situation!
ON/OFF Switches
Pilot lights
850
750
WATTS
WATTS
BOTH 1600 WATTS
With pilot lights ON, the heater is ON!
HOW TO USE YOUR HEATER
FITTING THE WHEELS
fig.1
fig.3
WATTS ECONOMIZER
For more economical use, the Min. or Med. Watt
switches may be used individually, after unit has
reached the operating temperature.
fig.2
fig.4
3
Advertisement
