Honda 2009 Fit Owner's Manual page 268

Main Menu Table Of Contents
Replacing a Fog Light Bulb
On Sport model
The fog lights use halogen bulbs.
When replacing a bulb, handle it
carefully. See page 262 for more
information.
SCREW
1. Use a Phillips-head screwdriver to
remove the screw.
2. To remove the fog light assembly,
pull it out of the bumper.
ELECTRICAL CONNECTOR
3. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
4. Remove the bulb by turning it
about one-quarter turn
counterclockwise.
2009 Fit
5. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the fog lights to test the
new bulb.
8. Reinstall the fog light assembly,
then tighten the screw.
Lights
CONTINUED
265