Specifications - Holux GM-270 User Manual

Cf gps receiver
Hide thumbs Also See for GM-270:
Table of Contents

Advertisement

5. Specifications

Tracks up to 12 satellites.
Receiver: L1, C/A code
Snap Start: <3 sec(at < 25 minutes off
period).
Update rate: 1 HZ.
Acquisition time
Reacquisition
Hot start
Warm start
Cold start
Position accuracy:
Non DGPS (Differential GPS)
Position
5-25 m CEP without SA
Velocity
0.1 m/sec, without SA
Time
1 usec sync GPS Time
EGNOS/WAAS
Position
< 2.2 m, horizontal 95% of time
< 5 m, vertical 95% of time
Dynamic Conditions:
Altitude
Velocity
Acceleration
Jerk
Antenna Type: Built in Active Antenna
Minimum signal tracked: -175dBW
Dimension: 91×50 ×20 mm
Weight : < 45g
* The specifications are subject to be changed without notice.
* The measurement functions of this GPS CF card are not intended for use in tracking measurements
that requires professional or industrial precision. Values produced by this GPS CF card should be
considered as reasonable accurate representations only.
0.1sec.averaged
8 sec., averaged
38 sec., averaged
45 sec., averaged
18,000 meters max.
(60,000 feet )
515 meters / second max.
(700 knots)
4 G, max
20 meters/second, max
LED function:
power On/Off and Navigation
Update Indication
Operation Temperature:
-10
to +70
Store Temperature:
-45
to +85
Operation Humidity:
5% to 95% No condensing.
Power consumption
<80mA at 3.3V+/-10% input
Protocol and interface:
NMEA output protocol: V.2.2
Baud rate: 4800 bps
Data bit: 8
Parity:
N
Stop bit: 1
Output format:
Standard: GGA,GSA,GSV, RMC.
Optional: GLL,VTG,or SiRF binary
NMEA Input messages
NMEA/SiRF Binary Set altitude,
position, date & time, select output
messages and rates
Interface:
H/W: Compact Flash - CF type I
S/W: Emulated COM Port 1-8 (Auto Select)
13

Advertisement

Table of Contents
loading

Table of Contents