Connections - HOME2US 8800 IR User Manual

3. CONNECTIONS

Please refer to Figure 1 and Figure 2 for the following instructions. Connect the LNB cable from
the dish antenna to the LNB IN connector on the back of the digital satellite receiver. Use the
RCA audio/video cables to connect the Audio Left, Audio Right, and Video Outputs to the
corresponding connectors on TV.
To switch between standby and power-on states, or exit from menu or submenu.
To adjust the volume output of the receiver when receiving TV programs, or
change parameters within the menu.
When receiving TV programs, pressing these keys switches to the next higher or
lower numbered program, or to move the scroll bar up or down on the menu.
MENU To bring up the main menu.
To enter the next lower level submenu or to confirm the parameter value
OK
entered.
CARD
The smart card must be inserted in the slot when viewing scrambled programs.
READER
Digital Satellite Receiver HOME2US 8800 IR - User's Manual
.
Figure 1 - Front Panel
- 5 -