Antenna Setting - HOME2US 8800 IR User Manual

.

5.5.1.1 Antenna Setting

You can select the Antenna and LNB settings for service searching, as well as the settings of
22KHz tone and DiSEqC switch. There are 32 possible antenna settings. The values set in this
menu are available for selection in other Service Searching Menus.
Press ▲/▼ keys to select between the following items, press ◄/► or 0...9 to change its value:
SAT No.
You can select the satellite number by pressing ◄/► keys. The total number is 32.
SAT Name
It shows the satellite name. You can change the name by pressing FAV+, FAV- keys.
LNB Freq.
Select the L.O. Frequency that is set to antenna. You can select the LNB frequency of 5150,
9750, 10600, 10750, 11250, or 11300 MHz by using the ◄/► key. If the required LNB frequency
is not available then enter the frequency using the 0...9 keys.
22kHz
Set to OFF to select dual-LNB or set to ON to select two antennas connected to a 22kHz tone
switch.
DiSEqC
According to the option and position of DiSEqC switch, you can select from A to D of DiSEqC and
turn it OFF.
Skew
This function is not implemented in this receiver.
Digital Satellite Receiver HOME2US 8800 IR - User's Manual
- 13 -