DeLonghi Pinguino PAC CT110 Instructions For Use Manual page 9

Using the remote control
• At the end of the set time the appliance switches off automatically.
• To cancel the timer programming, press the timer button
beep and both displays reset to display the settings prior to activation of the timer.
How to program delayed start up
• With the air conditioner off, press the press the timer button
start-up" flashes on the display. Now make all the desired settings for when the applian-
ce will switch on (operating mode, fan speed and temperature). Confirm the settings by pres-
sing the timer button
Set the time when you want the appliance to switch off using the buttons
to 24 hours).
During the first ten hours, you can select half hour intervals. For times greater than ten hours,
one hour intervals can be selected.
• Press the timer button
set is also displayed on the control panel, confirming setting of the timer. The light (H) flashes
on the air conditioner display. A countdown of the time left is displayed on both displays.
• At the end of the set time the appliance switches on automatically, with the settings made
previously.
• To cancel the timer programming, press the timer button
a beep and both displays reset to stand-by.
12
(19) . The time is displayed and the "h" symbol flashes.
(19) again to confirm the start-up time. A beep sounds and the time
(19) again. The appliance emits a
(19) . An arrow indicating "timer
(from 30 minutes
(19) again. The appliance emits