Table of Contents
Advertisement
(see control panel on the opposite page)
Select the fan speed required pressing "Fan speed" key B.
Nota: The "TIMER ON" pilot light will only come on with programmed mode.
(*)
Note We therefore recommend that when starting up the appliance, the thermostat be turned to
maximum (thick green line = maximum cold). When the desired temperature has been reached, turn the
thermostat slowly away from the maximum cooling position until the appliance switches off. Leave the
thermostat in this position. The air-conditioner is now programmed to maintain the exact temperature at
all times.
Insert the plug into the electrical outlet and press the A button
The warning light
Select the "programmed" or "non programmed" mode (see
previous page)
Select the button corresponding to the desired function:
AIR CONDITIONING/HEATING
AIR-CONDITIONING
The button (C) must be
released.
Turn the thermostat toward
the Max. Cold position (thick
green line). (*)
The appliance will turn on
in the air conditioning
mode. In the opposite case,
see page 34.
To switch off the appliance,
press key A (ON/OFF main switch).
will turn on
HEATING
The button (C) must be
pressed.
Turn the thermostat toward
the Max. Warm position
(thick fuchsia line). (*)
The appliance will turn on
in the heating mode. In the
opposite case, see page 34.
In the heating with ventilation mode, the fan always operates
at maximum speed and once the desired temperature is
reached, the ventilation function stops.
Hide quick links:
Advertisement
Table of Contents
