Multi-Air Conditioner; Names And Functions Of Each Part - Hitachi RAF-35NH5 Instruction Manual

MULTI-AIR CONDITIONER

With this multi-air conditioner, several indoor units can be connected to one outdoor unit to be
driven. You can operate the required number of indoor units.
Combination of operations:
When operation mode is selected:
• You cannot operate the indoor units in
the following combinations.
One unit
Heating
During automatic operation:
• When heating operation is automatically selected for the first indoor unit, the next indoor unit will then start to
heat. Also, if cooling or dehumidifying is automatically selected for the first indoor unit, the next indoor unit will
also start to cool or dehumidify.
Adjusting the number of indoor units:
Decrease the number of
indoor units to be operated
especially when it is very hot
or very cold or when you
want to reach the preset
temperature quickly.

NAMES AND FUNCTIONS OF EACH PART

INDOOR UNIT
Air filter
MODEL NAME AND DIMENSIONS
MODEL
RAF-25NH5
RAF-35NH5
RAF-50NH5
(INDOOR UNIT)
Other unit
Cooling
Dehumidifying
Circulating (fan)
Remote controller
750mm (29-17/32")
• The indoor unit which is switched on first continues to
operate, but other indoor units which is switched on later
does not operate while the lamp lights.
• To restart an indoor unit which was operated later, stop
the indoor unit which was operated first or later and reset
the type of operation, then perform operation again.
Stopped indoor units:
When an indoor unit is operated in the cooling,
heating or dehumidifying mode in one room,
the sound of refrigerant flow may be heard
from a stopped indoor unit or a stopped indoor
unit may become warm. This is because the
indoor unit returns refrigerant to the outdoor
unit to be ready for operation.
Indoor unit indicators
Horizontal air deflector (Air outlet)
Vertical air deflector (Air outlet)
Signal receiver
Front panel (Air intake)
Vertical air deflector (Air outlet)
WIDTH HEIGHT
600mm (23-5/8")
– 4 –
DEPTH
215mm (8-15/32")