About; Audio Panel - Honeywell Dolphin 70e Black User Manual

About

The About system settings screen displays specific information about the terminal. Three information
screens are available: Version, Device ID, and Copyrights.
To access the About system screen, touch
The Version Screen
Displays the information about the software, operating system, and processor.
The Device ID Screen
Displays the information the terminal uses to identify itself to other devices. It can be important to know
this information if the Dolphin terminal is going to be part of a networked system of devices.
• Device name: Displays the system's default name. This is the name used by ActiveSync.
• Description: Displays the description of the device ID.
The Copyrights Screen
Displays important copyright information.

Audio Panel

The Audio Panel settings allow you to specify the Preferred Media Audio Device used for media
playback and audio recording. There are six device options: Auto, Handset, Speaker, Headset, Aux, or
Bluetooth HS. The Mic Volume slider adjusts the audio input volume (gain) for the preferred device
selected.
Note: Changes made to the Audio Panel only affect media playback
and recording. Phone audio settings are not affected.
To access the Audio Panel settings, touch
> Settings
Select Auto from the Preferred Media Audio Device list to
set the terminal to automatically detect and use the system
default device.
Note: If you select a preferred device that is not available, for
example, you select Headset but do not connect the headset
to the terminal; the audio defaults to Auto until the preferred
device becomes available.
Touch Reset on the tile bar to discard changes and revert to
the default Audio Panel settings or select OK to save
changes.
> System > Audio Panel
> Settings > System
.
. > About .
6 - 11