Turning Power On/Off; Suspend Mode; Replacing The Main Battery - Honeywell Dolphin 70e Black User Manual

Turning Power On/Off

To turn the terminal On, press the Power button
To turn the terminal Off:
1. Press and hold the Power button
2. Touch Power off.

Suspend Mode

Suspend mode differs from Power off mode. Power off mode is the equivalent to having no battery or
external power source connected to the device. The terminal does not receive incoming calls when
power is off since the device completely shuts down. In Suspend mode, the device enters a low power
state to conserve battery power. The radio associated with the phone maintains enough power to wake
the terminal for incoming phone calls.
Suspend mode automatically turns the touch screen off to save battery power when the terminal is
inactive for a programmed period of time. The automatic timeout limits are adjustable from the Advance
tab located under Settings > System > Power (see page 6-23).
Press and release the Power button
Note: You should always place the terminal in Suspend mode before removing the battery. For information on
removing the battery, see

Replacing the Main Battery

Note: Before replacing the main battery, read the
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
1. Press the Power button
2. Remove the battery door and battery as illustrated below.
2
for approximately 4 seconds until the options menu displays.
to toggle the terminal in or out of Suspend mode.
Replacing the Main Battery
Guidelines for Battery Pack Use and Disposal
to place the terminal in Suspend mode.
1
3
.
on page 2-13.
5
6
on page 3-13.
4
2 - 13