Parts And Functions - Honeywell Dolphin 9900 User Manual

Parts and Functions

Front Panel
Terminal Wells
The base contains 4 terminals wells. Each well
• Holds and charges the main battery pack of one Dolphin terminal.
• Contains the companion to the I/O connector on the bottom panel of Dolphin terminals.
• Has two LEDs on the front: the Dock LED and the Charge LED.
Dock LED
Each terminal well displays a Dock LED on the front that lights solid green when a terminal is
properly seated, which means that the terminal and the base are connected.
Charge LEDs
Each terminal well displays a Charge LED on the front that lights green to indicate charging.
For details, see
Back Panel
Power Supply Connector
This connector receives input from the power adapter. Plug the power connector cable from
the power adapter into this connector. There is no ON/OFF switch on the back panel of the
base. The power switch is on the power adapter.
13 - 2
Terminal Wells
Dock Charge
LED LED
Charging Terminals on page
Rev C
10/30/08
13-4.
Power Supply Connector
Dolphin® 9900 Mobile Computer
User's Guide