Canceling A Program; Changing A Program; Programming The Delayed Start - Beko Dishwasher Instruction Booklet

Program indicator 15 c lights up when
the program is over. Remaining Time
Indicator (3) displays "0:00".

Canceling a Program

Press Start / Pause / Cancel button (2)
for three seconds to cancel a program
that is already running. Release the
button when symbol (12) start
flashing in the display. For a couple of
minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(11) displays "0:00". You may select
and operate a new program following
the program cancellation process.
There might be residues of detergent
or rinse aid left in the machine and/or
on the pieces being washed depending
on the step the previous program was
in at the time of such cancellation.

Changing a Program

If you want to change running program,
first of all press Start / Pause / Cancel
button (2) to switch your machine into
pause mode. Second, switch to the
desired program by pressing Program
Selection button (4). Third, Start the
new program by pressing Start / Pause
/ Cancel button (2) again. Your new
selection will resume operation from
the step in the previous program (For
example, if the previous program was
in rinsing step, the new one will also
start from the rinsing step). If you want
to run the newly selected program from
the beginning, you have to apply the
program cancellation process first and
then select a new program.
Programming the Delayed
Start
You can delay the start of the selected
program until 9 hours. Delayed start
can not be set after the program starts.
The selected program must not be
started in order to be able to set the
delay time.
Delayed start indicator
(13) will start flashing when the
delayed start button (6) is pressed. You
can set the desired time by pressing
the delayed start button (6). Press the
Start / Pause / Cancel button (2) after
setting the time. The delayed start
indicator sand glass (13) and play
icon (12) will remain lit on the display
during the delayed start countdown
and the delay time indicator (11) will
display the remaining time. Program
will start automatically when the
countdown is over.
You can use the delayed start function
if you are utilizing the economic
electricity tariff.
If you want to change the program or
functions while the delayed start
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button (2). You will see that
the countdown stops. The delayed start
indicator will start flashing. Select the
new program and/or add the functions
as described in Program Selection
and Table of Average Consumption
Values. Resume the delayed start
countdown by pressing the Start /
Pause / Cancel button (2).
If you want to cancel delayed start
countdown while it is in progress, then
press the Start / Pause / Cancel button
(2) for three seconds. Release the
button when
flashing in the display. For a couple of
26 GB
sand glass
symbols (12) start