Factory Reset - Hitachi 28LD5200E Service Manual

The Expression of input signal mode (format)
PAL1: RF, S and Composite of PAL/SECAM
PAL2: Component of PAL (YCBCR)
PAL3: Component of PAL (YPBPR)
PAL4: Component of PAL (YCBCR-SCART)
PAL: PAL1-4
NT1: S and Composite of NTSC
NT2: Component of NTSC (YCBCR)
NT3: Component of NTSC (YPBPR)
NT4: Component of NTSC (YCBCR-SCART)
NTSC: NTSC1-4
HD1-6: Component (shown in the table )
HD7: Component of 1080i/50 (YPBPR)
HD8: Component of 1080i/50 (YCBCR)
HD9: Component of 576p (YPBPR)
HD10: Component of 576p (YCBCR)
HD: HD1-10 of Component
TV: NTSC / HD
PC: PC signal

Factory Reset

After all of the adjustments of main chassis are finished, perform FACTORY RESET.
Press the SUB-POWER( ) button, INPUT SELECT(
more than 5 seconds.
The unit is set to factory settings.
28LD5200E (PW1L)
Video
Input
AV1
AV2
) button and
15
Judgment of
System
H.Frequency
PAL 15.75kHz
(576i)
NTSC 15.75kHz
(480i)
PAL 31.25kHz
(576p)
NTSC 31.50kHz
(480p)
NTSC 45.00kHz
(720p)
PAL 28.125kHz
(1080i)
NTSC 33.75kHz
(1080i)
button at the same time, and hold for
Video Input
Mode
Setup
Auto PAL2
SDTV/DVD PAL2
HDTV PAL3
Auto NT2
SDTV/DVD NT2
HDTV NT3
Auto HD10
SDTV/DVD HD10
HDTV HD9
Auto HD3
SDTV/DVD HD3
HDTV HD2
Auto HD5
SDTV/DVD HD6
HDTV HD5
Auto HD7
SDTV/DVD HD8
HDTV HD7
Auto HD1
SDTV/DVD HD4
HDTV HD1