GEM DG-100 Operation User's Manual

Split digital keypad entry system

Advertisement

DG-100 Split Digital Keypad Entry system
Operation User's Manual (5 Codes)

1. Product Characteristic:

Allows up to 99 PIN codes
Random user codes for anti-peeping
Fully Programmable via keypad and master code
LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
Metal die casting housing
Deftly dimension for narrow jamb
With vandal resistant screws
Split of controller and reader for high security.

2. Specifications:

Operating Voltage: 12 Vdc
Current Draw: Average 15mA, Peak 70mA @ 12Vdc
Output: N.O./N.C./Com. Output (free voltage contact)
Relays Rated: 2A MAX @30Vdc ;0.4A @ 120Vac
Relay Activation Time: (*100)
Strike Time: 1~99 seconds(adjustable)
Strike mode: Access Timer or Latch
PIN codes: 5 digit codes
User codes capacity: 99 slots
Operating Temperature: -20~+70℃
Ambient Humidity: 5~95% relative humidity non-condensing
Factory Master Code: 12345
Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of
incorrectly Master Codes enrolled or PIN codes attempted(None beeper signal of
keypad activations).
EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.
Color: Beige White
Distance between the keypad and controller board: Maximum 50 M (cable#22~26 AWG).

3. The indicator signal chart:

Sound and LED indicator:
Green LED
LED signal
Yellow LED
Sound signal
Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-DG100-5C Ver. B Published on 2007.09.20
Relay activated
Red LED
Power on, stand-by
Programming mode
1 Beep
Key-in, Effective PIN codes
Entering 、Exiting from the Program mode
2 Beeps
Data computing error 、 other operation mistakes
3 Beeps
Master Code reset to Factory (12345)or remove all
5 Beeps
stored user codes
Page: 1/ 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DG-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for GEM DG-100

  • Page 1: Specifications

    DG-100 Split Digital Keypad Entry system Operation User's Manual (5 Codes) 1. Product Characteristic: Allows up to 99 PIN codes Random user codes for anti-peeping Fully Programmable via keypad and master code LED display with audible indication Non-Volatile Memory Invalid PIN Lock-out...
  • Page 2 4. Default Setting: Master code 12345 Relay time 5 Pressed key delay 30 seconds Setting mode delay time 50 seconds 5. Operation Instruction: Enter Program Mode: 1. Compose twice the master code (Factory master is 「12345」) → 2 beeps → you are now in the "programming mode". 2.
  • Page 3: Wiring Diagram

    Master Code reset to Factory 「12345」 and Delete All User Codes Insert the jumper RESET 1-2 position 5 audible beeps Reset Master Code successful (after 5 seconds) 5 audible beeps Delete All User Codes Return Insert the jumper to 2-3 positions. 6.

Table of Contents