1. Manuals
  2. Brands
  3. Faroudja Manuals
  4. Computer Hardware
  5. DVP3000
  6. Installation and operation manual

Faroudja DVP3000 Installation And Operation Manual

Digital video processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

DVP3000
DVP3000U
Digital Video Processor
Installation and
Operations Manual
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVP3000 and is the answer not in the manual?

Questions and answers

Related Manuals for Faroudja DVP3000

Summary of Contents for Faroudja DVP3000

  • Page 1 DVP3000 DVP3000U Digital Video Processor Installation and Operations Manual...

  • Page 2: Table Of Contents

    No part of this document may be copied, photocopied, translated, or reproduced to any electronic medium or machine readable form without prior consent, in writing, from Faroudja Laboratories, Inc. The Faroudja name, logo and Picture Plus are registered trademarks of Faroudja, Inc.

  • Page 3: Product Description

    DVP3000. DCDi , Directional Correlation Deinterlacing, prevents the introduction of motion The DVP3000 is a full function Scaler that offers artifacts from video original material such as computer scan rates of VGA, SVGA, XGA and sporting events. The Scan-Lock...
  • Page 4 Product Description The greatest benefit of the DVP3000 is the image For material originated from video cameras, such quality, a result of a complex three stage process as sporting events, DCDi is used. Directional called Picture Plus™ Technology. Correlation Deinterlacing prevents the introducing of jagged edges and blurring.

  • Page 5: Installation

    3. Component Video Interlaced or Progressive(RCA) Installation 4. HDTV/Computer (D15M) The DVP3000 processor is designed to be either placed on a table or rack mounted. If the rack 10. AC Power mounting installation kit is to be used, the rack mount ears are mounted by using 3 screws.
  • Page 6 DVP3000. monitors or to a second display device. Because of the high performance of the DVP3000 it is very important to use the highest 6. BNC connectors for main output to display quality cables possible, for both input and output devices.

  • Page 7: Setup

    To prevent to recall the proper geometry settings in the accidental alteration of the setup parameters, DVP3000. (See Aspect Ratio Control section on setup can only be done from the front panel page 7) or with the RS232 interface.
  • Page 8 RS232 Baud rate 4800 Aspect Ratio Control 9600 (Default) 19200 The DVP3000 has a unique Aspect Ratio control to allow for maximum performance from a display DCDi Mode device. There are two types to choose from. On (Default) For proper operation, the correct...
  • Page 9 Anamorphic and Letterbox sources: Note: The Anamorphic scaling feature on a Since the DVP3000 controls the aspect ratio 4:3 screen is only available at scan rates 720p conversion, the projector stays in the anamorphic and faster.

  • Page 10: Operating Instructions

    HDTV-Pass (RGB, YUV, YPrPb)* 4. Value +/ - : Adjusts the levels or changes settings of the Function selected. Note: The DVP3000 will auto-detect if the Component input is interlaced or progressive. 5. Factory Preset: Recalls all settings to The DVP3000U will also auto-detect if the input Factory levels.

  • Page 11: Remote Control

    3. By Direct Access + 1, 2, 3 keys Save to Preset 4, Press Factory To activate the control of the DVP3000 press: Note: To save Presets, first select the desired preset with the Value keys, then press Factory to FDJA enter.
  • Page 12 Operating Instructions To change Aspect Ratio press: Each press toggles to the next input or press the number pad while the OSD is visible for: ASPECT MENU 1. Composite Video 2. S-Video 3. Component Repeat pressing will toggle through the different 4.
  • Page 13 Pin 3 = Rx as 150. Pin 2 = Tx Detail can be accessed by pressing: All commands to the DVP3000 are sent using ASCII text strings. DETAIL Note: A command must start with STOP...
  • Page 14 RS232 Instructions Setup Commands Command Function OSDON Turn OSD On OSDOFF Turn OSD Off Image Size OSD Vertical Start (0=Cropped, 1=Normal) (0=top off screen) Scan Rate (0-8) E0/E1 ECHO OFF/ON 0= Line Doubled Operation Commands 1= Frame Doubled* 2= 800x600 ON/OFF Power ON/OFF 3= 720p...

  • Page 15: Specifications

    Specifications DVP3000 / DVP3000U Inputs (Interlaced) Composite 1vpp S-Video Y – 1v pp C -286mv pp Component (YCrCb) Y - 1vpp (Interlaced) Cr – 700mv pp Cb – 700mv pp Component (YPrPb) Y - 1vpp (Progressive) Cr – 700mv pp Cb –...
  • Page 16 Appendix A – Scan Rate Specifications NTSC MODE Line Double Frame Double 800x600 720P 1024x768 Quad 1280x1024 1080P 1080i Horizontal Frequency (KHz) 31.468 62.938 37.76 44.95 48.31 62.94 63.89 67.43 33.715 Vertical Frequency (Hz) 59.94 119.88 59.94 59.94 59.94 59.94 59.94 59.94 59.94...

  • Page 17: Warranty

    All warranty claims should be made at the place of purchase. No products may be returned to Faroudja without its consent. If requested by Faroudja, purchaser agrees to provide proof of purchase and to return defective products to Faroudja, transportation charges prepaid.

This manual is also suitable for:

Dvp3000u

Table of Contents