PEDESTAL KIT
DISASSEMBLY INSTRUCTIONS
Protect the floor with a large piece of
1
cardboard.
Lay the appliance on the cardboard.
Be sure the cardboard is under the entire
lower back of the appliance.
Pull up the drawer to disassemble.
3
Remove two (2) screws on the either side of
5
the drawer.
6
Open the drawer, and then remove the four (4)
2
screws (two on each side) on both side of
drawer.
Remove four (4) screws on the drawer.
4
Remove Eleven(11) screws on the cover
6
assembly. (Upper Cover 3EA, Bottom 4EA,
Back 4EA)