Pedestal Installation – Washer - LG WDP4 Series Service Manual

PEDESTAL INSTALLATION – WASHER
Make sure the leveling feet of the appliance
1
are fully retracted.
Once the leveling feet of the washer are fully
retracted, tighten all locknuts securely.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor for
proper operation.
Make sure the back feet are in the correct
3
positions.
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
Tighten all 4
locknuts securely
PEDESTAL KIT
For dryer
For washer/combo
Position the appliance on top of the pedestal.
2
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
Make sure the holes on the pedestal align with
4
the holes in the appliance, then install 4 screws
at each corner to securely attach the appliance
to the pedestal.
NOTE: If the screws are not installed properly,
noise and vibration may result.
Move the appliance to the desired location.
3