Subwoofer Setting Adjustment (Sub-W2)
When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level
of Subwoofer.
The display shows "+6" – "- 6".
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.
Non Fading Output (NonFad)
When the Non Fading Output setting is ON, the audio signal does not pass through this unit's
low pass filter (for the Subwoofer), but is output through the RCA output.
• When the Subwoofer Controller setting is only "S.W Control:EXT", you can switch the Non Fading
Output ON/OFF mode. (Refer to page 66.)