Depending on the kind of vehicle, the function of
3* and 5* may be different. If this is the case, be
sure to connect 2* to 5* and 4* to 3*.
Connect leads of the same
color to each other.
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
In some vehicles, the ISO connector may
be divided into two. In this case, be sure to
connect to both connectors.
This product
Antenna jack
Multi-CD player
(sold separately)
Subwoofer output or
Non Fading Output
IP-BUS cable
Yellow (2*)
To terminal always supplied with
power regardless of ignition switch
position.
Red (4*)
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Speaker leads
White
:
White/black :
Gray
:
Gray/black
:
Green
:
Green/black :
Violet
:
Violet/black :
IP-Bus input (Blue)
Fuse holder
Front left
Front left
Ã
Front right
Front right
Rear left
or Not used
Ã
Rear left
or Not used
Rear right
or Subwoofer
Rear right
or Subwoofer