Hydrosport™ Exercise Bars; Installing The Stationary Exercise Bars; Hydrosport™ Aquatic Fitness Bar; Installing The Aquatic Fitness Bar - Dimension One Spas Aquatic Fitness System Owner's Manual

Dimension One Spas - Aquatic Fitness System - Owner's Manual
HydroSport™ Exercise Bars

Installing the Stationary Exercise Bars

Exercise Locations
The AFS design contains multiple OptiMount™ locations for rapid installation of HydroSport™
equipment in a variety of locations and combinations.
Connecting the Exercise Bars
HydroSport™ Aquatic Fitness Bar

Installing the Aquatic Fitness Bar

Snap one end of the tensor cord to the Butterfly Top.
The other end of the cord snaps on one end of the
Aquatic Fitness Bar. Repeat for the other end of the bar.
The bar can connect to the same OptiMount™ because
the design accomodates multiple pieces of gear.
22
The Exercise Bars connect to the AFS
OptiMounts™ using Butterfly Tops. Push
the Butterfly Top screw through the hole in
the end of the bar and screw it into the
OptiMount™. Repeat for the other end of
the bar.
If two bars connect to the same
OptiMount™, line up the holes on the bars,
insert the Butterfly Top and connect to the
OptiMount™.