TSG (TURBO STEAM GENERATOR)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
[WD-❋❋❋❋❋FDS]
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
Hinge
(Damper)
(FRICTION DAMPER)
Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
Taking ou the screw of the TSG.
Remove the back cover.
After loosening the bolt, Rotor, pull out the
rotor.
Remove the 6 bolt from the stator.
Disconnect the 2 connectors.
Remove the hinges (Damper) at the Tub.
HOW TO ASSEMBLE THE MOTOR
The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
The hinge at the base is pulled off.
(To arrow direction)
30