Bluetooth; Registering A Bluetooth Device For The First Time - JVC RV-NB90B Instructions Manual

Bluetooth

You can listen to music from a Bluetooth
device through the System.
NOTE
• In order to use these functions, the device
must be compatible with AVRCP and A2DP
profiles.
• Some Bluetooth devices may not be
available to the System.
Registering a Bluetooth device for
the first time
1. Turn the System on.
2. Press Bluetooth 6.
Remote control
(after 5 to10 seconds)
• While "CONNECT" is blinking, you cannot
perform any operations except for
turning the System off.
3. Perform the pairing operation on the
target Bluetooth device.
For information on operating the target
Bluetooth device, see the instruction manual
for the Bluetooth device.
Select "RV-NB90" from the list.
When the target device requests the
passkey during pairing operation, enter
"0000. "
The pairing is completed and the target
Bluetooth device is connected to the System
automatically. The Bluetooth indicator lights.
20
Main unit
PAIRING
*1
4. Start playback of the target Bluetooth
device.
The sound from the Bluetooth device is
emitted from the System.
Playback may start automatically with
some Bluetooth devices.
NOTE
• The pairing is necessary only when
connecting for the first time.
*1 The Bluetooth device last used will be
connected automatically by turning on
the Bluetooth function of the device while
"CONNECT" blinks on the display window.
To re-connect another Bluetooth device,
operate the device to connect while "BT
READY" appears on the display window.
To control the Bluetooth device from
the System
operation
Play/Pause
Stop
Skip
Fast Forward/Fast
Rewind
button
Press Bluetooth 6.
Each time you press
the button, playback
is started/paused.
Press 7.
Press 4/1 or
¡/¢.
Press and hold
4/1 or ¡/¢.