E-Mu 404 Owner's Manual page 85

Select the Track that you want to record by clicking on it in the arrange window. The
19.
rack darkens to indicate that it is selected. See the "Cubasis Demo Song Screen"
above.
Record a Track
Press Record on the Cubasis Transport control and start playing. There will be a two
20.
bar count-in before recording starts.
Press Stop (or hit the space bar) when you're finished recording the first track.
21.
Press the Return-to-Zero button on the Cubasis Transport (or tap the space bar
22.
twice).
Press Play on the Cubasis Transport to play back your track.
23.
Record Another Track
Return to Zero by tapping the space bar twice.
24.
Select the next track to record by clicking the appropriate track in the Arrange
25.
window. Remember to choose the appropriate side (L or R) if recording in mono or
choose a stereo track if recording in stereo.
Press Record on the Cubasis transport and start playing. You'll hear the first track as
26.
well as what you're playing.
Press Stop (or hit the space bar) when you're finished recording.
27.
ASIO Recording Checklist - Cubasis
An ASIO Send is inserted into a PatchMix DSP Mixer strip.
E-MU ASIO is selected (Options, Audio Setup, Audio System Setup)
ASIO Buffer Latency is set to 5 ms or lower (depending on the speed of your computer).
(Options, Audio Setup, Audio System Setup, ASIO Control Panel)
Play in Background enabled. (Options menu)
Enable Monitor is selected. (Options menu, Audio Setup)
Record Enable is turned on for the track you want to record. (Use Inspector button, then
click on Enable, illuminating the button.)
VST Inputs are selected. (Panels menu, VST Inputs)
Bring up the VST Channel Mixer. Turn Input Meter button on.
Master Mixer output assigned to ASIO 31/32.
An ASIO Strip on ASIO 31/32 exists in the PatchMix DSP Mixer.
Monitor button is selected on the channel you are recording. See the diagram on
E-MU Digital Audio System
6 - Tutorials: Recording and Mixing
Basic Recording
f You can turn the
metronome off by
pressing the Click button
on the Transport control.
Double-click the 'Click'
button to edit the click
and countoff settings.
Cubasis Tip: If you're
f
recording several tracks
using the same inputs,
you can simply drag a
recorded Part (audio
chunk) down to the next
track then start recording
again without changing
input settings.
page 76
77