E-Delay Compensator - E-Mu 404 Owner's Manual

To Setup and use E-Wire:
Setup PatchMix DSP
Open PatchMix DSP application.
1.
Insert an ASIO Input mixer strip into PatchMix DSP. (Alternately, you can select
2.
"New Session", select "E-Wire Example" and skip to step 6.)
Mute the strip or turn the Fader all the way down.
3.
Insert an ASIO Send plug-in into one of the inserts on your ASIO strip.
4.
Name your ASIO strip as an E-Wire strip.
5.
Insert the desired PatchMix DSP effects into slots above the ASIO Send.
6.
Save the Session.
7.
Setup Cubase
Launch Cubase.
8.
Instantiate E-Wire VST in an Insert or Aux Send location within Cubase.
9.
Edit the E-Wire plug-in and activate the plug-in by pressing the red button.
10.
Set the ASIO Send and Return on the E-Wire plug-in to match the strip you set up
11.
for E-Wire.
Done.
12.
E-Delay Compensation
An E-Delay Compensator must be inserted into any other audio tracks that are not using
E-Wire in order to keep them time-aligned.
Simply insert an E-Delay Compensator plug-in into the same insert location you
13.
used for E-Wire on any other audio tracks. That's it.

E-Delay Compensator

As audio is transferred back and forth between the VST host application and the E-MU
sound hardware, a delay in the audio stream is incurred. Normally this delay is compen-
sated for automatically by the host application, but not all VST host applications
support this automatic compensation.
A host will support PowerFX and E-Wire's plug-in delay compensation if it supports the
SetInitialDelay feature of the VST 2.0 specification.
E-MU Digital Audio System
5 - Effects
E-MU VST E-Wire
67