Christie LX450 103-010100-01 User Manual page 12

Part Names and Functions
Rear Terminal
!0 R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
!1 AUDIO MONITOR OUTPUT JACK (VARIABLE)
This jack outputs the audio signal from computer
or video equipment to external audio equipment
(pp.22–24).
!2 MONITOR OUTPUT TERMINAL (ANALOG)
This terminal outputs the video signal from
computer to external video equipment (pp.22, 24).
!3 CONTROL PORT CONNECTOR
When controlling the projector from a computer,
connect the computer to this connector with a
control cable.
!4 Infrared Remote Receiver (Back)
The infrared remote receiver is also located in the
front (pp.10, 18).
12
✽
!4 !3 !2 !1 !0
✽ RESET button
A built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will
shut down and restart the unit. Do not use the RESET
function excessively.