Warranty; Safety Directive - Homelite CSP3816 - UT74123A Operator's Manual

GUARANTEE – STATEMENT
RTSA / RTUK / RTG)
All Homelite products are guaranteed from defects in material and workmanship, for a period of twenty-four (24)
months, effective and evidenced from date of original invoice or delivery note.
Defects caused by normal wear and tear, unauthorised/improper maintenance/handling or overload are excluded
from this guarantee, as are accessories such as battery packs, bulbs, blades and bits etc.
In the event of malfunction within the guarantee period, please return the assembled product with proof of purchase
to your dealer or nearest Homelite service Centre.
Your statutory rights in respect of defective products remain unaffected by the warranty.
Ryobi Technologies GmbH,
Ryobi Technologies,
Homelite / R.T.S.A,
BP 50012 - 95945 Roissy CDG Cedex – FRANCE
Ryobi Technologies Australia PTY Limited,
EC DECLARATION OF CONFORMITY
According to machinery directive 98/37/EC and EMC directive 89/336/EEC - We,
Homelite Consumer Products Inc., 1428 Pearman Dairy Road, Anderson, SC 29625, USA
Declare in sole responsibility that the product: CSP3816 UT74123A), CSP4518 UT74125A), and CSP4520 UT74127A) to which
this certificate applies, conforms to the basic health and safety requirements of the Machinery Directive 98/37/EC and other
relevant directives, such as EMC Directive 89/336/EEC and Outdoor Directive 2000/14/EC.
EC type examination certificates have been issued by the following approved body, following the requirements set out in EMC
Directive 89-336/EEC by: SLG Certificate No. 1005240
To effect correct application of the health and safety requirements stated in the EEC directives, the following European and/or
national standards and/or technical specifications were consulted:
DIN, EN 608:12/94 / EN292-1:1991 / EN292-2:1991 / ISO 7182:1991 / ISO 3767-5:1992 / ISO 3864:1984 / ISO 6531:1982 /
ISO 6533:1993 / ISO 6534:1992 / ISO 6535:1991 / ISO 7293:1983 / ISO 7505:1986/ISO 7914:1986 / ISO 7915:1991 /
ISO 8334:1985 / ISO DIS 9207:1991 / ISO 9518:1992 / ISO 10726:1992 / CISPR 12:1990
Wayne Hill
Director, Environmental Compliance

WARRANTY

Itterpark 7, D-40724 Hilden, Germany
Customer Services, Anvil House, Tuns Lane, Henley-on-Thames, RG9 1SA, UK
359-361 Horsley Road, Milperra, NSW 2214 Australia

SAFETY DIRECTIVE

Homelite Consumer Products, Inc.
1428 Pearman Dairy Road
Anderson, SC 29625, USA
January 24, 2003
UK - Page 39