Homelite CSP3816 - UT74123A Operator's Manual page 15

STARTING A COLD ENGINE:
3. Move the chain brake to the BRAKE position.
NOTE: Set the chain brake by pushing the chain brake
lever/hand guard forward (towards the bar) to the brake
position. Refer to "Operation – Operating Chain Brake"
for additional information.
4. Set the ignition switch to the RUN (I) position.
5. Fully press and release the PRIMER BULB 7 times.
6. Pull CHOKE lever all the way OUT to full position. The
partial throttle position is automatically set when the
choke lever is set at full choke.
CHOKE LEVER
OPERATION
Fig. 14
STARTER
GRIP
Fig. 15
UK - Page 15
CHOKE
LEVER
TRIGGER
RELEASE
THROTTLE TRIGGER
Fig. 16
STARTER
GRIP
Fig. 17
RUN POSITION
Fig. 18