Specification - LG 26LD350 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LB01B
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature
: 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Module General Specification
No. Item
1 Display Screen Device
2 Aspect Ratio
3 LCD Module
4 Storage Environment
5 Operating Environment Temp. : -0 deg ~ 40 deg
6 Input Voltage
7 Power Consumption
8 Pixel Pitch
Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
66 cm(26 inch) wide color display module
16:9
66 cm(26 inch) TFT LCD HD
Temp. : -20 deg ~ 60 deg
Humidity : 10 % ~ 90 %
Humidity : 0 % ~ 85 %
AC 100-240 V~ 50 / 60 Hz
Power on (Blue)
AUO 43.24 W
Sharp 97.2 W
AUO 461.2 um x 461.2 um
Sharp 421.5 um x 140.5 um
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
- 6 -
Remark
LCD
Sharp / AUO
LCD (Module) + Backlight(Lamp)
LGE Internal Use Only