LG WT-R107 Service Manual page 37

SNAP RING.
Loosen the 6 fixing screws on the stator.
Clutch Motor
(Lower upper position screws)
Check the direction of SNAP RING.
(The handle of snap ring is toward to rotor and stator.)
Preventing fallen the stator, tighten with one hand and
Clutch Motor
then loosen the last screw.
For assembly take care lead wire's state, it produce a
Hall Sensor
Stator Housing
Water Guide
noise and cut attach the rotor.
Clutch Motor
7) Replacement of Bearing Housing ASM
and Clutch Motor
Clutch Motor
Loosen 16 Fixing screws on the Bearing Housing ASM
and pull it up.
Loosen 2 Fixing screws on the Clutch Motor and pull it
up.
Coupling ASM
37