Table of Contents
Advertisement
- Quick Links:
- Assembling Blade Tilting Handwheel
- Assembling Motor Pulley/Belt/Pulley Guard/Drive Belt
- Connecting Motor Cord to Switch Assembly
- Assembling Blade Guard/Splitter
- Assembling Rip Fence to Guide Rails
- Operating Controls & Adjustments
- Backlash Adjustments for Blade Raising/Tilting Mechanisms
- Changing Saw Blade
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 34-444 and is the answer not in the manual?
Questions and answers
How do I adjust the Blade to the Miter Slot. My blade is about 1/16th out of allignment
To adjust the Delta 34-444 table saw blade to the miter slot:
1. Loosen the Table Bolts: The blade assembly is attached to the table, so you need to loosen the bolts securing the table to the base.
2. Measure Blade Alignment: Use a precise measuring tool to check the distance between a specific tooth on the blade and the miter slot at both the front and back positions.
3. Adjust the Table: Tap the table gently with a dead blow hammer to make small adjustments.
4. Retighten Bolts: Once the blade is aligned with the miter slot, securely tighten the table bolts.
5. Recheck Alignment: After tightening, remeasure to ensure the alignment remains correct.
This method ensures the blade is parallel to the miter slot for accurate cuts.
This answer is automatically generated