Extensions And Conversions - Fujitsu PRIMERGY RX330 S1 Options Manual

Introduction
1.3

Extensions and conversions

Second processor
The server can be upgraded to a so-called dual processor system. A dual
processor system needs a multi processor operating system. The second
processor must have the same type and clock rate as the first.
Extension of the main memory
Eight slots (4 banks with 2 modules) are available for the main memory. Each
memory bank can be populated with 512 Mbyte (only D2440), 1 Gbyte, 2 Gbyte
or 4 Gbyte ECC DDR 2 SDRAM memory modules.
If the memory modules are populated in pairs, each pair must consist of
identical memory modules (2-way interleaved mode).
Additional accessible drive
One 5.25-inch bay is available for accessible drives.
Expansion boards in the PCI slots
The system board offers 1x PCI-Express x8 slot.
Additional the following slots are available by a riser card:
– 1 x PCI Express x8 slot, 1 x PCI Express x4 slot and
1 x PCI-X (64 Bit / 66 MHz, ZCR) slot, or
– 1 x PCI Express x8 slot, 1 x PCI-X (64 Bit / 66 MHz) slot and
1 x PCI-X (64 Bit / 66 MHz, ZCR) slot.
RX330 S1
Extensions and conversions
Options Guide 7