SkyLink HU-318 User Manual page 19

TC REMOTE
Program TC to Wireless Modules
1. Refer to the User's Instructions for the Wireless Module you have, in order to
put the unit into 'Learning' mode.
2. Click the [Learn] box on the TC Remote page, then click the number button
you want to control the Wireless Module with.. :
3. The Wireless Module should respond indicating this TC Remote button is
now programmed. Follow the same learning instructions for the Zone
command and All On/Off control.
TC REMOTE PROGRAMMING THE INTERNET HUB
PROGRAMMING THE INTERNET HUB
19