Assign Zones And Lights - SkyLink HU-318 User Manual

ASSIGN ZONES AND LIGHTS

10. Each light has 4 control buttons: On / Off / Bright / Dim
• Press the [ON] button to turn on that light.
• Press the [OFF] button to turn off that light.
• Press the [Bright] button to increase the brightness of that light.
• Press the [Dim] button to decrease the brightness of that light.
Note: To change the brightness, make sure the Wireless Module and the load
(i.e. the light bulb) are dimmable.
11. You can setup a camera to view live images of this zone.
Please refer to the 'Settings
12. To program the zone control, go to the Zone page and click [Settings].
You will see the following screen. For instance, in the Kitchen zone,
there are 4 lights. First put the Island Light Module into learning mode,
then press the [Learn] button on this screen. Next put the Spot Light module
into learning mode, then press the same [Learn] button on this screen again.
Repeat this step for all the modules in the [Kitchen] zone.
ASSIGN ZONES AND LIGHTS
PROGRAMMING THE INTERNET HUB
page' to setup a wireless camera.
PROGRAMMING THE INTERNET HUB
10