Daikin FXDQ-M Engineering Data page 19

Installation
Be sure to check the type of R-410A refrigerant to be used
before installing the unit.
NOTE: Using an incorrect refrigerant will prevent normal
operation of the unit.
For the installation of an outdoor unit, refer to the installation
manual attached to the outdoor unit.
2-1 PRECAUTIONS
• Be sure to instruct customers how to properly operate the
unit,such as operating different functions and adjusting the
temperature, by having them carry out operations them-
selves while looking at the operation manual.
• Do not install in locations where the air contains high levels
of salt such as near the ocean and where voltage fluctuates
greatly such as in factories, vehicles or vessels.
18
2-2 ACCESSORIES
Check that the following accessories are included with your
unit:
Metal Drain hose
Name
clamp (1) (2)
Quantity 1 pc. 1 pc.
Shape
Screws for duct Washer for
Name
flanges (7) hanger bracket (8)
Quantity 1 set
Shape
24 pcs.
Conduit mount-
Name
ing plate
Quantity 1 pc.
Shape
Name Sealing material (12)
Quantity 2 pcs.
Shape
2-3 OPTIONAL ACCESSORIES
• This indoor unit requires one of the operation remote con-
trols listed below.
Remote controller
Wired type
Wireless type
EDUS39-600-F2_a
Insulation for fitting Sealing pad
1 each 1 each
Large (5)
for liquid pipe (3)
for gas pipe (4)
mid. (6)
Washer fixing
Clamp
plate (11)
8 pcs. 1 set 4 pcs.
Large (9)
8 pcs.
small (10)
4 pcs.
Screw for conduit
Pipe insulation
mounting plate
2 pcs. 1 pc.
Air filter (13)
1 pc.
• Operation manual
• Installation manual
BRC1D71
BRC4C82
FXDQ-M