Dell PowerVault MD3200i Deployment Manual page 50

3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Use the following IP address and enter the IP address, subnet mask,
and default gateway addresses.
If you are using a DNS server:
1 In the Control Panel, select Network connections or Network and Sharing
Center and then click Manage network connections.
2 Right-click the network connection you want to configure and select
Properties.
3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Obtain DNS server address automatically or enter the preferred
and alternate DNS server IP addresses and click OK.
If you are using a WINS server:
NOTE:
If you are using a DHCP server to allocate WINS server IP addresses, you
do not need to add WINS server addresses.
1 In the Control Panel, select Network connections.
2 Right-click the network connection you want to configure and select
Properties.
3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Advanced WINS tab and click Add.
5 In the TCP/IP WINS server window, type the IP address of the WINS
server and click Add.
6 To enable use of the Lmhosts file to resolve remote NetBIOS names, select
Enable LMHOSTS lookup.
50
Guidelines for Configuring Your Network for iSCSI