Normal Operations (Ac Power Applied) - Cisco DPC2320 DOCSIS User Manual

Normal Operations (AC Power Applied)

The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
1
POWER
2
DS
3
US
4
ONLINE
5
LINK
6
WIRELESS
ON/OFF
7
WIRELESS
SETUP
Note: In addition to the status shown in the previous table, some service providers
use color-coded LEDs to indicate detailed channel bonding and data link status. For
additional information about color-coded LEDs, check with your service provider.
4042831 Rev A
Normal Operations
On
On
On
On

On - When a single device is connected to the Ethernet
port and no data is being sent to or from the residential
gateway

Blinks - When an Ethernet device is connected and data is
being transferred between the consumer premise
equipment (CPE) and the residential gateway

Off - When no device is connected to the Ethernet port

On - When the wireless access point is enabled and
operational

Blinks - When data is being transferred between the CPE
and the wireless home gateway

Off - When the wireless access point is disabled

On - When Wireless Setup is not active

Blinks - When Wireless Setup is active to add new
wireless clients on the wireless network
Normal Operations (AC Power Applied)
97