Alarm; Temperature Alarm; Door Alarm; Activating The Alarm System - Miele KDN 12623 S -1 Operating And Installation Instructions

Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer section
cannot rise unnoticed and to avoid
energy being wasted if a door is left
open.

Temperature alarm

An alarm will sound if the temperature
in the freezer section becomes too
warm. The temperature display and the
alarm indicator light will also flash.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The alarm will sound and the alarm
indicator and temperature display will
flash, for example,
– if the freezer section door has been
left open for a while, e.g. in order to
load, re-arrange or take food out.
– when freezing large amounts of food
at once.
– in the event of a power cut.
Depending on the temperature in the
freezer, you should check the condition
of the food. If food has defrosted or
started to defrost, check that it is still
safe to use, and if so, use it as quickly
as possible. Defrosted food may only
be re-frozen after it has been cooked.

Door alarm

The alarm will sound if the freezer
section or refrigerator section door is
left open for more than approx. 60
seconds.

Activating the alarm system

The alarm system is always active. It
does not have to be switched on
manually.

Switching the alarm off early

The alarm will stop and the indicator
light will go out when the temperature
reaches the correct level again.
However, if the noise disturbs you, you
can switch the alarm off before this if
you wish.
^ Press the alarm off button.
The alarm will stop.
The indicator light will stay on until
the correct temperature has been
reached. The alarm system is then
ready should it be needed again.

Alarm

19