Fitting And Replacing The Charcoal Filters; Resetting The Charcoal Filter Operating Hours Counter - Miele DA 3560 Operating And Installation Instructions

Fitting and replacing the
charcoal filters
If the cooker hood is connected for
recirculation, two active charcoal filters
(optional accessory) must be inserted
in addition to the grease filters. The
charcoal filters absorb normal kitchen
odours
Charcoal filters can be obtained from
your Dealer or Miele.
See back cover for contact details,
and "Technical data" for type and
reference number.
The slots for the charcoal filters are
located above the grease filters.
^ Remove the cover. It is held in place
by magnets.
^ Push the charcoal filters into the
slots.
^ Replace the lid.
Cleaning and care
^ When fitting the charcoal filters for
the first time:
Activate the operating hours counter
(see "Operation").
Always replace the charcoal filters im-
mediately if
– the Charcoal filter symbol — of the
operating hours button lights up,
or
– they are no longer effective at
absorbing kitchen odours.
They should, however, be replaced at
least every 6 months.
^ Used charcoal filters can be
disposed of with normal household
waste.
Resetting the charcoal filter
operating hours counter
After replacing the charcoal filters, the
operating hours counter needs to be
reset.
^ To do this, with the fan switched on,
press the operating hours button [—
twice. Hold the second press for
approx. 3 seconds until only the 1 is
flashing.
The Charcoal filter symbol — will go
out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
^ Press the operating hours control
[— twice. Hold the second press for
approx. 6 seconds until only the 1 is
flashing.
21