Disconnecting The Camera From The Computer - Sony Cyber-shot DSC-HX300 User Manual

Cyber-shot User Guide
Before Use
Operating the camera
Shooting
Viewing
Useful shooting functions
Useful viewing functions
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Using with your computer > Importing images to a computer > Disconnecting the camera

Disconnecting the camera from the computer

Perform the procedures from step 1 to 2 below before:
Disconnecting the cable.
Removing a memory card.
Inserting a memory card into the camera after copying images from the internal memory.
Turning off the camera.
1. Click the disconnect icon (
With Windows 7 or Windows 8, click
2. Click [Safely remove USB Mass Storage Device].
Notes
Drag and drop the icon of the memory card or the drive icon to the "Trash" icon beforehand when
you use a Mac computer, and the camera is disconnected from the computer.
The disconnect icon may not appear when you use a Windows 7 computer. In this case, you can
disconnect the camera from the computer without following the above steps.
Copyright 2013 Sony Corporation
208
) on the tasktray.
first, then click
Search
from the computer
.
Back to top
Print